Hey, Programming Meade is not difficult, but just inconvenient. A lot of slow menus to get simple things done. Startup of the system also takes time. I’ll post some pics later.
MotionTimer does not use an MX2, as far as I know. They use their variant of the OMTLE engine from openmoco.org (they made changes based on their architecture), and last I heard, the netbook ran the Slim UI (but I don’t know if they’ve created a new UI since I last saw).
Generally, I’m not one to nitpick, but you compare the richness of the UIs between our MX2, the Kessler Oracle, and your controller. However, the only one that is not publicly documented or with demo videos of the UI is yours *grin* (Admittedly, you may have posted this somewhere, and I missed it…)
Another minor correction: If you attempted to use a Meade DS2000 head with the DP system, you’d need two controllers, that much is true. However, the MX2 is fully capable of natively controlling the Orion/Merlin heads directly, with no separate controller, and it is fully integrated into the normal workflow, allowing for one-stop programming for up to 4-axis of control.
Good job talking about a lot of the players out there.
Regarding our controller – It’s true we haven’t launched the instructional videos yet. Simply we wanted to go past the main development and it will be documented more in details once we release the new OmniSlider firmware update. However, its features and capabilities are clearly (I hope) described on DitoGear’s site. Moreover you have the manual available (at the moment being updated) with the details of the controller interface.
Great news about MX2 and Orion. That makes much things easier and puts some light on MotionTimer design.
Excellent information. Omnislider seems to be the best off-the-shelf solution for those wanting a quality piece of equipment. Can you give more details on using it as a video slider… one speed? variable? vertical? Need 2 tripods? 1m weight? power requirements?
Scarlet,
It has variable speed, from 1m/1000h to 1m/12s in video mode. Fully adjustable, with acceleration control in real time. May be set up vertically with lighter cameras (up to 5kg). Needs 2 tripods or works on the ground level with additional Support Feet Pro. You’ll find all technical details on http://www.ditogear.com. It is powered using 12V – 24V DC.
It would be appropriate to mention about more sophisticated systems, regarded as a “real” motion control rigs. You’ve surely heard about them before. Just check out http://www.mrmoco.com
Well, of course I know them, and I know that Milo is in Poland (Platige), but my focus was to review a range of gear that is available and useful for timelapse shooters. I doubt we can take easily Milo for a trip with us Even if we could afford it!
Jakiś czas temu pisaliśmy o realizacji spotów produktowych dla Domu Światła. Teraz wspólnie z Divante dzielimy się wiedzą na temat rezultatów przeprowadzonej akcji.
Trafiłem dziś przypadkiem na niesamowity materiał timelapse stworzony przez Paulo Castillo, a także na jego konstrukcji kran timelapse’owy. Mówiąc krótko – powalające. Zarówno same próbki, jak i możliwości urządzenia. Jak na razie nie udało mi się dotrzeć do większej ilości szczgółów, ale planuję powęszyć w tym temacie niebawem. Jedyny minus tego urządzenia to jak na [...]
Każdy filmowiec i firma produkcyjna prędzej czy później zmierzyć musi się z problemem archiwizacji danych filmowych, których ilość rośnie w tempie wykładniczym z dnia na dzień. Jak sobie z tym problemem poradzić?
W tym odcinku zajmiemy się podstawową wiedzą teoretyczną niezbędną do tego, by świadomie podejść do realizacji ujęć w technice timelapse, a także uniknąć podstawowych błędów, które mogą być źródłem frustracji.
really great job! thanks for all the work!
this is really helpfull!!!
cheers
tom
thanx, nice overview! do have pics or vid from the meade/ditogear combo? how easy/difficult is it to program the meade?
Hey, Programming Meade is not difficult, but just inconvenient. A lot of slow menus to get simple things done. Startup of the system also takes time. I’ll post some pics later.
Patryk,
MotionTimer does not use an MX2, as far as I know. They use their variant of the OMTLE engine from openmoco.org (they made changes based on their architecture), and last I heard, the netbook ran the Slim UI (but I don’t know if they’ve created a new UI since I last saw).
Generally, I’m not one to nitpick, but you compare the richness of the UIs between our MX2, the Kessler Oracle, and your controller. However, the only one that is not publicly documented or with demo videos of the UI is yours *grin* (Admittedly, you may have posted this somewhere, and I missed it…)
Another minor correction: If you attempted to use a Meade DS2000 head with the DP system, you’d need two controllers, that much is true. However, the MX2 is fully capable of natively controlling the Orion/Merlin heads directly, with no separate controller, and it is fully integrated into the normal workflow, allowing for one-stop programming for up to 4-axis of control.
Good job talking about a lot of the players out there.
!c
Thanks for clarification and your notes.
Regarding our controller – It’s true we haven’t launched the instructional videos yet. Simply we wanted to go past the main development and it will be documented more in details once we release the new OmniSlider firmware update. However, its features and capabilities are clearly (I hope) described on DitoGear’s site. Moreover you have the manual available (at the moment being updated) with the details of the controller interface.
Great news about MX2 and Orion. That makes much things easier and puts some light on MotionTimer design.
Thanks again!
Excellent information. Omnislider seems to be the best off-the-shelf solution for those wanting a quality piece of equipment. Can you give more details on using it as a video slider… one speed? variable? vertical? Need 2 tripods? 1m weight? power requirements?
Scarlet,
It has variable speed, from 1m/1000h to 1m/12s in video mode. Fully adjustable, with acceleration control in real time. May be set up vertically with lighter cameras (up to 5kg). Needs 2 tripods or works on the ground level with additional Support Feet Pro. You’ll find all technical details on http://www.ditogear.com. It is powered using 12V – 24V DC.
It would be appropriate to mention about more sophisticated systems, regarded as a “real” motion control rigs. You’ve surely heard about them before. Just check out http://www.mrmoco.com
tip: Milo is avaible in Poland!
Well, of course I know them, and I know that Milo is in Poland (Platige), but my focus was to review a range of gear that is available and useful for timelapse shooters. I doubt we can take easily Milo for a trip with us
Even if we could afford it!